To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C
iPrefaceThank you for purchasing this user system interface cable (HS3802ECH61H) for the Renesas’soriginal microcomputer H8/3802, H8/38004 group.The H
iiContentsSection 1 Configuration...1Section 2 Connection Proced
1Section 1 ConfigurationCAUTIONUse an IC149-064-008-B5 socket (manufactured byYAMAICHI ELECTRONICS Co., Ltd.) for the FP-64Apackage IC socket on th
2Table 1 lists the HS3802ECH61H components. Please make sure you have all of thesecomponents when unpacking.Table 1 HS3802ECH61H ComponentsNo. Compon
3Section 2 Connection Procedures2.1 Connecting User System Interface Cable to Emulator StationWARNINGObserve the precautions listed below. Failure
4Emulator stationCable body connectorUser system interface cableE6000Figure 2 Connecting User System Interface Cable to Emulator Station
52.2 Connecting User System Interface Cable to User SystemWARNINGAlways switch OFF the user system and the emulatorproduct before the USER SYSTEM INTE
62.2.3 Inserting Cable HeadCAUTIONCheck the location of pin 1 before inserting.Align pin 1 on the IC socket for an FP-64A package on the user system w
7Fasten the user system interface cable head to the IC socket for an FP-64A package on the usersystem with the four screws (M2 x 12 mm; with four flat
82.2.5 Fastening Cable BodyConnect the cable body to the cable head.Cable bodyCable headRemove jigPush the remove jigs.RemovingUser systemFigure 4 F
Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang
92.3 Recommended Dimensions for User System Mount PadFigure 5 shows the recommended dimensions for the mount pad (footprint) for the user systemwith a
102.4 Dimensions for User System Interface Cable HeadThe dimensions for the user system interface cable head are shown in figure 6. Unit: mmTo
112.5 Resulting Dimensions after Connecting User System Interface CableThe resulting dimensions, after connecting the user system interface cable head
12Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use a Philips-type screwdriver whose head
13MCUPin 1IC socket (IC149-064-008-B5manufactured by YAMAICHI ELECTRONICS Co., Ltd.)User systemScrews (M2 x 8 mm)with flat washersSocket coverFigure 8
14Section 4 Verifying Operation1. When using the H8/3802 group E6000 emulator (HS3800EPI60H), turn on the emulatoraccording to the procedures descri
15Figure 9 shows the system clock oscillator on the user system interface cable and the subclockinput specifications.R2 270R1 1 MHCU04HCU04To E6000 em
16Section 5 Notice1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cablehead before inserting the cable h
17P131Figure 11 P1 Short Connector
H8/3802 Group FP-64A User System Interface Cable for E6000 Emulator User's ManualPublication Date: Rev.3.00, December 19, 2003Published by:
H8/3802 Group FP-64A User System Interface Cable for E6000 EmulatorUser’s ManualUser’s Manual Rev.3.0 2003.12H8/3802 HS3802ECH61HERenesas Microcomp
1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanH8/3802 Group FP-64AUser System Interface Cable for E6000 EmulatorREJ10B0098-030
CautionsKeep safety first in your circuit designs!1. Renesas Technology Corp. puts the maximum effort into making semiconductor productsbetter and mor
IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for f
IILIMITED WARRANTY Renesas warrants its user system interface cables to be manufacturedin accordance with published specifications and free from d
IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t
IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for future ref
VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or
Comments to this Manuals