Renesas HS7144ECH61H User Manual download pdf (Page 18)

Section 5 Connection Procedures

5.1 Connecting User System Interface Board to User System

WARNING

Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE BOARD

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are correctly

aligned. Failure to do so will result in a FIRE HAZARD and

will damage the user system and the emulator product or

will result in PERSONAL INJURY. The USER PROGRAM will

be LOST.

To connect the cable head to the user system, follow the instructions below.

5.1.1 Installing IC Socket

Solder the IC socket for an FP-112B package to the user system.

CAUTION

Be sure to completely solder the leads so that the solder

slops gently over the leads and forms solder fillets. (Use

slightly more solder than the MCU.)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Renesas HS7144ECH61H User Manual Page 18