4E1 Emulator R0E000010KCE00 E20 Emulator R0E000200KCT00 User’s Manual Rev.4.00 May 2014 All information contained in these materials, including
E1/E20 Emulator Terminology R20UT0398EJ0400 Rev.4.00 Page 10 of 39 May 16, 2014 Terminology Some specific words used in this user's manua
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 11 of 39 May 16, 2014 1. Outline This chapter describes the package components, the syst
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 12 of 39 May 16, 2014 1.2. System Configuration The E1 or E20 emulator is used by connec
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 13 of 39 May 16, 2014 1.4. Specifications Table 1.3 lists the specifications of the E1 o
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 14 of 39 May 16, 2014 1.5. Regulatory Compliance Notices 1.5.1. European Union regulator
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 15 of 39 May 16, 2014 1.6. Emulator Hardware Configuration As shown in Figures 1.2 and 1
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 16 of 39 May 16, 2014 1.7. The Names of the Emulator Parts The names of the emulator par
E1/E20 Emulator Outline R20UT0398EJ0400 Rev.4.00 Page 17 of 39 May 16, 2014 E1 Emulator E20 Emulator (a)(b) I O(c)(b)(a) (a) Host-side connec
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 18 of 39 May 16, 2014 2. Setup 2.1. Installing Emulator Software Insert the installation m
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 19 of 39 May 16, 2014 2.3. Connecting the Emulator to the User System Use the procedure be
Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semicond
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 20 of 39 May 16, 2014 (2) A connector to the user-system interface cable must be instal
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 21 of 39 May 16, 2014 38-pin to 14-pin conversion adapter (top view)R0E000200CKA00(includ
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 22 of 39 May 16, 2014 Connector (top view): Area with limit on mounted components5 mmUser
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 23 of 39 May 16, 2014 2.4. Turning the Power On/Off Turn the power of the E1 or E20 emulat
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 24 of 39 May 16, 2014 2.4.2. When Power is supplied to the User System from the Emulator (
E1/E20 Emulator Setup R20UT0398EJ0400 Rev.4.00 Page 25 of 39 May 16, 2014 2.5. Connecting System Ground The emulator's signal ground is c
E1/E20 Emulator Troubleshooting (Action in Case of an Error) R20UT0398EJ0400 Rev.4.00 Page 26 of 39 May 16, 2014 3. Troubleshooting (Action in
E1/E20 Emulator Maintenance and Warranty R20UT0398EJ0400 Rev.4.00 Page 27 of 39 May 16, 2014 4. Maintenance and Warranty This chapter covers b
E1/E20 Emulator Maintenance and Warranty R20UT0398EJ0400 Rev.4.00 Page 28 of 39 May 16, 2014 4.3. Repair Provisions (1) Repairs not covered b
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 29 of 39 May 16, 2014 Appendix A Self-Checking Program (SCP) This section gives the p
E1/E20 Emulator Preface R20UT0398EJ0400 Rev.4.00 Page 3 of 39 May 16, 2014 Preface The E1 emulator (R0E000010KCE00) and the E20 emulator (R0E0
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 30 of 39 May 16, 2014 A.2 Preparations for Self-Checking (1) The following items are
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 31 of 39 May 16, 2014 A.3 Executing the Self-Checking Program (1) Execute the E1/E20
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 32 of 39 May 16, 2014 (2) Click on the [START] button to start the self-checking prog
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 33 of 39 May 16, 2014 If the user interface cable has been connected to the user syst
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 34 of 39 May 16, 2014 (3) As soon as the self-checking program is started. “TEST1 is
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 35 of 39 May 16, 2014 If you click on the [Cancel] button, “FAIL” is displayed on the
E1/E20 Emulator Appendix A R20UT0398EJ0400 Rev.4.00 Page 36 of 39 May 16, 2014 In the case of failure, the word “FAIL” is displayed, followed
E1 Emulator R0E000010KCE00 E20 Emulator R0E000200KCT00 User’s Manual Publication Date: May 16, 2014 Rev.4.00 Published by: Renesas Elec
http://www.renesas.comRefer to "http://www.renesas.com/" for the latest and detailed information.Renesas Electr
R20UT0398EJ0400 E1 Emulator R0E000010KCE00 E20 Emulator R0E000200KCT00 User’s Manual
E1/E20 Emulator Important R20UT0398EJ0400 Rev.4.00 Page 4 of 39 May 16, 2014 Important Before using the emulator, be sure to read this user’s
E1/E20 Emulator Important R20UT0398EJ0400 Rev.4.00 Page 5 of 39 May 16, 2014 Usage restrictions: The emulator has been developed as a means of
E1/E20 Emulator Precautions for safety R20UT0398EJ0400 Rev.4.00 Page 6 of 39 May 16, 2014 Precautions for Safety This chapter, by showing the
E1/E20 Emulator Precautions for safety R20UT0398EJ0400 Rev.4.00 Page 7 of 39 May 16, 2014 WARNING Warnings for AC Power Supply: Do not repair
E1/E20 Emulator Precautions for safety R20UT0398EJ0400 Rev.4.00 Page 8 of 39 May 16, 2014 CAUTION Cautions to Be Taken for Handling The emulat
E1/E20 Emulator Contents R20UT0398EJ0400 Rev.4.00 Page 9 of 39 May 16, 2014 Contents Page Preface............
Comments to this Manuals