Damage to the microcontroller can be sustained with
incorrect settings.
• Confirm the mode pin settings.
• Press <Finish>.
The Flash configuration has now been completed.
If you have changed any workspace settings now is a good time to save the workspace.
• Select [File’ -> ‘Save Workspace’].
5.3.1.Connecting To HMon
We can now attempt to connect to the target device.
• Press the Green ‘Connect’ Icon.
HMon is able to discover the internal flash configuration of the device from the FDT kernel we configured earlier. HMon also needs
information on the location of the IO registers and internal / external RAM. This information is stored in a ‘.TCF’ file. The TCF file is supplied
and registered with HEW. As it is possible to have TCF files with slightly different configurations the following dialog is displayed to allow
selection.
• Select the TCF file that applies to your RSK.
• Press <OK>.
12
Comments to this Manuals