Renesas M306H2T-RPD-E User Manual download pdf (Page 44)

( 44 / 76 )

3.8 Making an MCU File for PD30

It is necessary to change the contents of the MCU file according to the MCU to be developed. Make

the MCU file "M306H2.MCU" for M306H2 and store it in the "mcufile" folder in the directory same

as emulator debugger PD30 is stored.

The contents of the MCU file (the SFR area, internal RAM area, internal ROM area, the name of the

firmware file) are shown below. Change the settings according to the MCU to be debugged. Use your

text editor for changing the contents of the MCU file.

The contents of the MCU file when using the M306H2MC are as follows:

0: SFR area Start address

3FF : End address

400 : Internal RAM Start address

17FF : End address

E0000 : Internal ROM Start address

FFFFF : End address

M30620B : Name of firmware (Do not change.)

0: Expansion No. PD30 V.4.00 or later required (Do not change.)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

No comments

Renesas M306H2T-RPD-E User Manual Page 44