Renesas R0E571250CFG00 User Manual download pdf (Page 26)

3.2 Connecting User System Interface Board to EV-Chip Board

WARNING

Observe the precautions listed below. Failure to do so

will result in a FIRE HAZARD and will damage the user

system and the emulator product or will result in

PERSONAL INJURY. The USER PROGRAM will be LOST.

1. Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE BOARD

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are

correctly aligned.

2. The user system interface board dedicated to the

emulator must be used.

1. Make sure the user system and emulator are turned off.

2. Align the connectors on the board with those on the EV-chip board according to their numbers

(figure 3).

3. Adjust the height of the spacer attached to the board with the user system.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

No comments

Renesas R0E571250CFG00 User Manual Page 26