Renesas Single-Chip Microcomputer SH7203 Technical Information download pdf (Page 19)

7.1.3. Board initialisation code (hwsetup.c/hwsetup.h)

Further hardware initialisation should be performed in this function. For debug purposes, the interrupt priority registers are initialised to zero

(as they would be after a power on reset). In the case of the tutorial the interrupts are configured and the LCD interface is initialised.

7.1.4. Main tutorial code (main.c)

The display initialisation and string display functions operate on the LCD display module. In addition to the tutorial code several samples of

use of the on chip peripherals are supplied. Check compatibility with a ks0066u controller and pin connection on the schematic before

connecting an LCD module not supplied by Renesas.

1 2 ... 14 15 16 17 18 19 20 21 22

No comments

Renesas Single-Chip Microcomputer SH7203 Technical Information Page 19