Renesas H8/36024 User Manual

2003.12.19H8/36014 Group, H8/36024 Group FP-48BUser System Interface Cable for E6000 EmulatorUser’s ManualHS36014ECH64HRenesas Microcomputer Developme

1Section 1 ConfigurationCAUTIONUse an NQPACK048SD socket (manufactured by TokyoEletech Corporation) for the FP-48B package IC socketon the user sys

2Table 1 lists the HS36014ECH64H components. Please make sure you have all of thesecomponents when unpacking.Table 1 HS36014ECH64H ComponentsNo. Comp

3Section 2 Connection Procedures2.1 Connecting User System Interface Cable to Emulator Station(H8/36014 Series)WARNINGObserve the precautions listed

4Figure 2 Connecting User System Interface Cable to Emulator Station

52.2 Connecting User System Interface Cable to Expansion I/O Board(H8/36024 Series)WARNINGAlways switch OFF the user system and the emulatorproduct be

6Cable body connectorUser system interface cableCTS screws (M3 x 6 mm)Expansion I/O board cableUSER INTERFACE CABLE6000 EMULATOE6000Figure 3 Connect

72.3 Connecting User System Interface Cable to User SystemWARNINGAlways switch OFF the user system and the emulatorproduct before the USER SYSTEM INTE

82.3.3 Inserting Cable HeadCAUTIONCheck the location of pin 1 before inserting.Align pin 1 on the IC socket for a FP-48B package on the user system wi

9Fasten the user system interface cable head to the IC socket for a FP-48B package on the usersystem with the four screws (M2 x 10 mm) provided. Each

102.3.5 Fastening Cable BodyConnect the cable body to the cable head.Figure 5 Fastening Cable Body

CautionsKeep safety first in your circuit designs!1. Renesas Technology Corp. puts the maximum effort into making semiconductor productsbetter and mor

112.4 Recommended Dimensions for User System Mount PadFigure 6 shows the recommended dimensions for the mount pad (footprint) for the user systemwith

122.5 Dimensions for User System Interface Cable HeadThe dimensions for the user system interface cable head are shown in figure 7.±Figure 7 Dimensi

132.6 Resulting Dimensions after Connecting User System Interface CableThe resulting dimensions, after connecting the user system interface cable head

14Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use the screwdriver provided for tighteni

15Figure 9 Installing MCU to User System

16Section 4 Verifying Operation1. When using the H8/36014 series E6000 emulator (HS3664EPI61H), turn on the emulatoraccording to the procedures desc

17Figure 10 shows the system clock oscillator on the user system interface cable.Figure 10 System Clock Oscillator

18Section 5 Notice1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cablehead before inserting the cable h

19Figure 12 P1 Short Connector

H8/36014 Group, H8/36024 Group FP-48B User System Interface Cable for E6000 Emulator User's ManualPublication Date: Rev.1.00, July 25, 2002

IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for f

H8/36014 Group, H8/36024 Group FP-48BUser System Interface Cable for E6000Emulator User’s ManualREJ10B0093-0200H

IILIMITED WARRANTY Renesas warrants its user system interface cables to be manufacturedin accordance with published specifications and free from d

IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t

IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for future ref

VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or

iPrefaceThank you for purchasing this user system interface cable (HS36014ECH64H) for the Renesas’soriginal microcomputer H8/36014series.The HS36014EC

iiContentsSection 1 Configuration.....................1Section 2 Connection Proced