Revision Date: Feb. 27, 2007Renesas Microcomputer Development Environment SystemSuperH™ Family / SH7125 Series R0E571250CFG00 Rev.3.00 SH71
VI means WARNING or CAUTION. Example: CAUTION AGAINST AN ELECTRIC SHOCK means PROHIBITION. Example: DISASSEMBLY PROHIBITED means A FORCIBLE ACTI
VII WARNING Warnings for AC Power Supply: • If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do no
VIII WARNING • If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect power immediately by unp
IX CAUTION Cautions for AC Adapter: • Use only the AC adapter included in this product package. • The included AC adapter is for this emulator. D
X WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emul
i Preface The R0E571250CFG00 is a user system interface board that connects a user system for the SH7125 PRQP0064GB-A (former code: FP-64AV) package
ii
iii Contents Section 1 Configuration ...1 Section 2 Environment
iv
1 Section 1 Configuration Figure 1 and table 1 show the configuration and components of the user system interface board for the PRQP0064GB-A (forme
2 CAUTION Use an NQPACK064SA socket (manufactured by Tokyo Eletech Corporation) and a HQPACK064SA (manufactured by Tokyo Eletech Corporation) for
3 Section 2 Environmental Conditions Maintain the conditions in table 2 when using the emulator. Table 2 Environmental Conditions Item Specificati
5 Section 3 Connection Procedures 3.1 Connecting User System Interface Board to User System WARNING Always switch OFF the user system and the
6 3.1.2 Installing Cable Head CAUTION Check the location of pin 1 before inserting. If the IC socket is not connected properly, the power-suppl
7 Fasten the user system interface board to the IC socket for a PRQP0064GB-A (former code: FP-64AV) package on the user system with the four screws (
8 3.2 Connecting User System Interface Board to EV-Chip Board WARNING Observe the precautions listed below. Failure to do so will result in
9 BoardSpacerUser systemEV-chip unitConnector No.User I/F Connector 1(CN4)EV-Chip Unit Connector No.Board Connector No.UCN1UCN2User I/F Connector 2(C
10 3.3 Recommended Dimensions for User System Mount Pad (Footprint) Figure 4 shows the recommended dimensions for the mount pad (footprint) for the
11 3.4 Dimensions for EV-Chip Unit and User System Interface Board The dimensions for the EV-chip unit and the user system interface board are shown
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use
12 3.5 Resulting Dimensions after Connecting User System Interface Board The resulting dimensions, after connecting the user system interface board
13 Section 4 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use a Philips-type screwdriver
14 MCU (SH7125)Screws (M2.0 x 6 mm)Socket coverPin 1User systemIC socket (NQPACK064SA manufactured by Tokyo Eletech Corporation) Figure 7 Installin
15 Section 5 Verifying Operation 1. Turn on the emulator according to the procedures described in the SH-2A, SH-2 E200F Emulator User's Manua
16
17 Section 6 Notice 1. Before connecting any parts or cables, make sure that pin 1 on the both sides are correctly aligned. 2. Do not apply exces
18
SH7125 Group PRQP0064GB-A User System Interface BoardUser's Manual Publication Date: Rev. 1.00, March 7, 2005
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japanhttp://www.renesas.comRefer to
SH7125 Group PRQP0064GB-A User System Interface Board User’s Manual
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future
II Target User of the Emulator Product: This emulator product should only be used by those who have carefully read and thoroughly understood th
III LIMITED WARRANTY Renesas warrants its emulator products to be manufactured in accordance with published specifications and free from d
IV State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages,
V SAFETY PAGE READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference.
Comments to this Manuals