Renesas Emulation Pod M3062PT3-RPD-E User Manual

Browse online or download User Manual for Networking Renesas Emulation Pod M3062PT3-RPD-E. Differences between M16C/30P and M16C/30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Rev.1.11
M16C/30P, M16C/30 Group
Differences between M16C/30P and M16C/30
January 2007 Page 1 of 8
APPLICATION NOTE
1. Abstract
2.
3. Contents
The following document describes differences between M16C/30P and M16C/30.
Introduction
The explanation of this issue is applied to the following condition:
Applicable MCU: M16C/30P, M16C/30
3.1 Function Differences
Table 3.1.1 and table 3.1.2 show the Function Differences.
Table 3.1.1 Function Differences (1)
(1)
Item M16C/30P M16C/30
Shortest instruction
Execution Time
62.5ns(f(XIN)=16MHz, VCC=3.0 to 5.5V)
100ns(f(XIN)=10MHz, VCC=2.7 to 5.5V)
62.5ns(f(XIN)=16MHz, VCC=4.2 to 5.5V)
100ns(f(XIN)=10MHz, VCC=2.7 to 5.5V, 1 wait)
Supply Voltage
VCC1=VCC2=3.0 to 5.5V(f(XIN)=16MHz)
VCC1=VCC2=2.7 to 5.5V(f(XIN)=10MHz,
no wait)
VCC=4.2 to 5.5V(f(XIN)=16MHz, no wait)
VCC=2.7 to 5.5V(f(XIN)=10MHz, 1wait)
Memory
Mask ROM
Flash Memory
One time Flash Memory
ROMLess
Mask ROM
Power Consumption
10mA(VCC1=VCC2=5V, f(XIN)=16MHz)
8mA(VCC1=VCC2=3V, f(XIN)=10MHz)
1.8µA(VCC1=VCC2=3V, f(XCIN)=32kHz,
wait mode)
0.7µA(VCC1=VCC2=3V, stop mode)
30.0mA(VCC=5V, f(XIN)=16MHz)
8.5mA(VCC=3V, f(XIN)=10MHz, 1wait)
0.9µA(VCC=3V, f(XCIN)=32kHz, wait mode)
External Device Connect
Area
04000h to 07FFFh
08000h to 0FFFFh (PM10=0)
10000h to 26FFFh
28000h to 7FFFFh
80000h to CFFFFh)
(PM13=0 or without PM13 bit)
D0000h to FFFFFh (Microprocessor mode).
04000h to 05FFFh
06000h to CFFFFh
D0000h to FFFFFh (Microprocessor mode)
Protect
Can be set for PM0, PM1, CM0, CM1, PD9,
PCLKR registers
Can be set for PM0, PM1, CM0, CM1, PD9
registers
INT Interrupt 5 ( INT0 to INT4 ) 3 ( INT0 to INT2 )
DMAC 2 channels 1 channels
Multifunction Timer
6 channels
Timer A x 3 channels, Timer B x 3 channels
5 channels
Timer A x 3 channels, Timer B x 2 channels
Timer A, Timer B Count
Source
Select from f1, f2, f8, f32, fC32 Select from f1, f8, f32, fC32
NOTES:
1. About the details and the characteristics, refer to hardware manual.
REJ05B0591-0111/
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - M16C/30P, M16C/30 Group

Rev.1.11 M16C/30P, M16C/30 Group Differences between M16C/30P and M16C/30 January 2007 Page 1 of 8 APPLICATION NOTE1. Abstract 2. 3. Contents The f

Page 2

REJ05B0591-0111/Rev.1.11 January 2007 Page 2 of 8 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/30Table 3.1.2 Function Differences (

Page 3

REJ05B0591-0111/Rev.1.11 January 2007 Page 3 of 8 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/303.2 Pin Function Differences Tabl

Page 4 - SFR Differences

REJ05B0591-0111/Rev.1.11 January 2007 Page 4 of 8 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/30 SFR Differences Table 3.3.1 shows

Page 5

REJ05B0591-0111/Rev.1.11 January 2007 Page 5 of 8 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/303.3 Interrupt Vector Differences

Page 6

REJ05B0591-0111/Rev.1.11 January 2007 Page 6 of 8 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/304. Reference Renesas Technology Co

Page 7 - REVISION HISTORY

REJ05B0591-0111/Rev.1.11 January 2007 Page 7 of 8 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/30REVISION HISTORY Description Rev.

Page 8

January 2007 Page 8 of 8 REJ05B0591-0111/Rev.1.11 M16C/30P, M16C/30 GroupDifferences between M16C/30P and M16C/30Notes regarding these materials

Comments to this Manuals

No comments