To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C
IV SAFETY PAGE READ FIRST • READ this user's manual before using this user system interface cable. • KEEP the user's manual handy for futur
V WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emul
i Preface The HS1544ECH61H is a user system interface cable that connects an H8SX/1544 group E6000H emulator (HS1544EPH60H; hereinafter referred to a
ii Contents Section 1 Configuration...1 Section 2 Connection Pr
1 Section 1 Configuration CAUTION Use an NQPACK144SD socket (manufactured by Tokyo Eletech Corporation) for the FP-144L package IC socket
2 Table 1 lists the HS1544ECH61H components. Please make sure you have all of these components when unpacking. Table 1 HS1544ECH61H Components No.
3 Section 2 Connection Procedures 2.1 Connecting User System Interface Cable to Emulator Station WARNING Observe the precautions listed below.
4 2. After making sure the direction of the cable body connector is correct, firmly insert the cable body connector into the emulator station socket
5 2.2 Connecting User System Interface Cable to User System WARNING Always switch OFF the user system and the emulator product before the USE
6 IC socket(NQPACK144SD manufacturedby Tokyo Eletech Corporation)User systemGuide pins4 projections to applyepoxy resin adhesive to Bottom view of IC
Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang
7 2.2.4 Fastening Cable Head CAUTION 1. Use the screwdriver provided for tightening screws. 2. The tightening torque must be 0.054 N•m or less
8 Fasten the user system interface cable head to the IC socket for an FP-144L package on the user system with the four screws (M2 x 10 mm) provided.
9 2.2.5 Fastening Cable Body Connect the cable body to the cable head. Cable bodyCable headRemove jigPush the remove jigRemovingUser system Figure 5
10 2.3 Recommended Dimensions for User System Mount Pad Figure 6 shows the recommended dimensions for the mount pad (footprint) for the user system
11 2.4 Dimensions for User System Interface Cable Head The dimensions for the user system interface cable head are shown in figure 7. Unit: mmTole
12 2.5 Resulting Dimensions after Connecting User System Interface Cable The resulting dimensions, after connecting the user system interface cable
13 Section 3 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use the screwdriver provided f
14 MCUPin 1IC socket(NQPACK144SDmanufactured byTokyo Eletech Corporation)User systemScrews (M2 x 6 mm)Socket cover Figure 9 Installing MCU to User
15 Section 4 Verifying Operation 1. Turn on the emulator according to the procedures described in the H8SX/1650 E6000H Emulator User's Manual
16 Section 5 Notice 1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable head before inserting the ca
H8SX/1544 FP-144LUser System Interface CableHS1544ECH61H User’s ManualUser’s Manual Rev.1.00 2006.06Renesas Microcomputer Development Environment Sy
17 6. Level-shift circuits with AVcc0, AVcc1, and Vref are mounted on the user system interface cable, as shown in figure 13. At shipment, the jump
18 AVcc0AVssAVcc1AVss1.03 k2 k1.03 k2 k+-+-5 V5 V13P4AVcc of MCU of the emulator stationSettings of short connector:Between pins 1 and 2: AVcc0Betwee
H8SX/1544 FP-144LUser System Interface CableHS1544ECH61H User's ManualPublication Date: Rev.1.00, June 28, 20
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japanhttp://www.renesas.comRefer to
1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanH8SX/1544 FP-144LUser System Interface CableREJ10J1393-0100HS1544ECH61H User’s M
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the cu
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this user system interface cable. • KEEP the user's manual handy
II LIMITED WARRANTY Renesas warrants its user system interface cables to be manufactured in accordance with published specifications and free
III State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so
Comments to this Manuals