Renesas H8S/2169 Series Technical Information download pdf (Page 9)

Section 2 Connection Procedures

2.1 Connecting User System Interface Cable to Expansion I/O board

WARNING

Observe the precautions listed below. Failure to do so

will result in a FIRE HAZARD and will damage the user

system and the emulator product or will result in

PERSONAL INJURY. The USER PROGRAM will be

LOST.

1. Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE CABLE

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are

correctly aligned.

2. The user system interface cable dedicated to the

emulator must be used.

To connect the cable body to the emulator station, follow the instructions below.

1. Make sure the user system and emulator station are turned off.

CAUTION

When connecting or removing the user system interface

cable, apply force only in the direction suitable for

connection or removal, while making sure not to bend or

twist the cable or connectors. Otherwise, the connectors

will be damaged.

2. Connect the expansion I/O board labeled USER INTERFACE CABLE and the user system

interface cable.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

No comments

Renesas H8S/2169 Series Technical Information Page 9