Renesas FLASH Development Toolkit 3.07 Instruction Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
Designing and Planning an M2150 System
36
Access Control Design Guide
Most installations use the standard Administration Client software, which gives access to all screens of
the SMS software (depending on operator permissions and the options purchased). However, for specialist
purposes, the following client types are also available:
Alarm Client – An Enterprise or Global edition client that can be used only to display the
View/Alarms screen for acknowledgment and clearing of alarms.
Web Client – Allows a client to use the SMS software remotely over the Internet or Intranet. Web
Clients require no client installation software, but a "Web Server" needs to be set up, as described in
the Web Access Installation and User Guide.
Central Card Handler Client – A Global edition client, which allows a central database of card
holders to be maintained and imported by the individual regional systems.
Global Client – A client for Global edition systems that can connect to any regional system and log
on as if it were a local client of that site for true remote management of sites. Alarms from regional
systems are displayed for alarm acknowledgment.
Each client supports up to four hardwired and dial-up chains.
Note: A single PC can be installed with the Central Card Handler Client software and the Global Client
software. In all other cases, the same PC cannot be used to support more than one client type.
Software Sentinels Required
Software sentinels (otherwise known as dongles) are required to operate the SMS software.
Business, Professional and Enterprise systems require:
A base sentinel on the SMS server.
An options sentinel on the server for any chargeable options purchased.
A Web Access sentinel on the web server if the optional Web Access module is purchased.
Enterprise systems also require:
A sentinel for each client PC.
Global systems also require:
A sentinel for each client PC.
A "Global Client" sentinel for each Global Client.
The "Global HO Base/Unrestricted" base sentinel on the head office server.
The "Global Region Base" base sentinel on each regional server.
An options sentinel on the head office and regional server for any chargeable options purchased.
A "Global Central Card Handler" sentinel on the Central Card Handler database machine (if used).
Determining the PC Requirements
Please refer to the Software Installation Manual for details of the PC hardware and software requirements.
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 72 73

Comments to this Manuals

No comments