Renesas FLASH Development Toolkit 3.07 Instruction Manual download pdf (Page 46)

Maintenance and Test Procedures

Access Control Design Guide

LED10 (DC COMMS) – Illuminated when an external door or alarms controller is connected.

LED11/12/13/14 (RDR 1/2/3/4) – Illuminated when the reader is connected properly.

LED19 (NIC1 Rx) – Illuminated when receiving data from the plug-in COM D port.

LED20 (NIC1 Tx) – Illuminated when transmitting data to the plug-in COM D port.

LED21 (NIC2 Rx) – Illuminated when receiving data from the plug-in COM E port.

LED22 (NIC2 Tx) – Illuminated when transmitting data to the plug-in COM E port.

LED15/23/27/39 (RX) – Illuminated when receiving data from a 20mA reader (off for Wiegand).

LED16/24/28/40 (BY) – Illuminated when the bypass relay is energized.

LED17/25/29/41 (TX) – Illuminated when transmitting data to a 20mA reader (off for Wiegand).

LED18/26/30/42 (RL) – Illuminated when the release relay is energized.

LED31/33 (COMA/B TX) – Flashes when there is a database unit connected to the COM A/B port.

Otherwise, the LED is not illuminated.

LED32/34 (COMA/B RX) – Flashes when there is a database unit connected to the COM A/B port.

Otherwise, the LED is permanently illuminated.

LED35 (RS232 TX) – Flashes when the on-board RS232 port (TB13) is transmitting data. Otherwise, the

LED is not illuminated.

LED36 (RS232 RX) – Flashes when the on-board RS232 port (TB13) is receiving data. Otherwise, the LED

is not illuminated.

LED37 (RS485 TX) – Illuminated when transmitting data to an external door or alarms controller.

LED38 (RS485 RX) – Illuminated when receiving data from an external door or alarms controller.

LEDs on the 8DBC and 8DC

LED1/5/9/13/39/43/55/59 (RECEIVE or RX) – Illuminated when receiving data from a 20mA reader (off for

Wiegand).

LED2/6/10/14/40/44/56/60 (TRANSMIT or TX) – Illuminated when transmitting data to a 20mA reader (off

for Wiegand).

LED3/7/11/15/41/45/57/61 (BYPASS or BY) – Illuminated when the bypass relay is energized.

LED4/8/12/16/42/46/58/62 (RELEASE or RL) – Illuminated when the release relay is energized.

LED47/49 (COMA/B TX) – Flashes when there is a database unit connected to the COM A/B port.

Otherwise, the LED is not illuminated.

LED48/50 (COMA/B RX) – Flashes when there is a database unit connected to the COM A/B port.

Otherwise, the LED is permanently illuminated.

LED51 (RS232 TX) – Flashes when the on-board RS232 port (TB15) is transmitting data. Otherwise, the

LED is not illuminated.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 72 73

No comments

Renesas FLASH Development Toolkit 3.07 Instruction Manual Page 46