Renesas FLASH Development Toolkit 3.07 Instruction Manual download pdf (Page 62)

Access Control Design Guide

C Appendix C: M2150 Specifications

Electrical

MN-PSU-6A power supply: Input is 19-20Vac or 24Vdc @ 150VA max. Output is 6.5A @12Vdc max (6A

for system power and 500mA for battery). Use only MN-TRANS-150-UL 19Vac transformer for UL294

applications.

MN-PSU-KIT (7000-5283) power supply: Input is 18Vac or 24Vdc @ 75VA max. Output is 3.0A @12Vdc

max (2.5A for system power and 500mA for battery). Use only MN-TRANS-75-UL 18Vac transformer for

UL294 applications. (Not approved for use with the 8DBC or 8DC controllers.)

RAK3 power supply: Input is 100-240Vac 50/60Hz. Output is 3.5A @12Vdc max.

MN-PSU-2+2: Input is 32Vac 50/60Hz, 150VA max. The 24Vdc output provides up to 2A for door

releases. The 12Vdc output provides a maximum of 2A. A separate 24Vdc output provides up to 500mA

for battery recharge.

Backup battery (not available for RAK3): 12V 7AH lead-acid. Battery capacity for emergency standby is at

least 1 hour.

On-board battery on DBU/2DBC/4DBC/8DBC: 3.6V 150mAHr NiCad battery; maintains data for 120 hours

during supply and backup battery power failure.

Reader port: Nominally 12Vdc supply, range 8.89-13.49Vdc, maximum of 500mA per reader port.

Door-release relays: rated at 28Vdc, 3A maximum.

Bypass relays: rated at 28Vdc, 3A maximum.

I/O module auxiliary-output relays: rated at 28Vdc, 3A maximum.

All elevator node relays: FORM C contacts, maximum load is 5A @ 250Vac, or 5A @ 30Vdc.

Maximum cable distances: see Table 2-5 on page 30.

Device-level maximum 12Vdc current consumption from Power Supply Board: See page 29.

Standards

EN50133, 1999/5/EC, UL294.

Physical

Cabinet dimensions

ENC3: 21 5/8" (550mm) height, 16 3/4" (425mm) width, 3 3/4" (95mm) depth.

ENC4: 22 1/8" (562mm) height, 20" (508mm) width, 4 1/8" (105mm) depth.

RAK3: For 19" racking systems. 3 1/8" (80mm) height.

CAB3A: 21 13/16" (554mm) height, 16 3/4" (425mm) width, 3 3/4" (95mm) depth.

CAB4A: 22" (560mm) height, 19 3/4" (500mm) width, 4 1/8" (105mm) depth.

CAB5: 27 3/4" (704mm) height, 22 1/16" (560mm) width, 4 1/8" (105mm) depth.

ENC-1: 13 3/4" (352mm) height, 17 1/4" (440mm) width, 3 3/8" (85mm) depth.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 72 73

No comments

Renesas FLASH Development Toolkit 3.07 Instruction Manual Page 62