Renesas FLASH Development Toolkit 3.07 Instruction Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
Maintenance and Test Procedures
42
Access Control Design Guide
LED15 (12V) – Illuminated when the 12Vdc supply is connected.
LED16 (5V) – Illuminated when the on-board 5Vdc supply is operating.
LED17 (3V) – Illuminated when the on-board 3Vdc supply is operating.
LEDs on the 4DC
LED1/2/3/4 (READERS OK 2/3/1/4) – Illuminated when the reader is connected properly.
LED5/11/20/26 (Rx) – Illuminated when receiving data from a 20mA reader (off for Wiegand).
LED6/12/21/27 (Tx) – Illuminated when transmitting data to a 20mA reader (off for Wiegand).
LED7/9/22/24 (BY) – Illuminated when the bypass relay is energized.
LED8/10/23/25 (RL) – Illuminated when the release relay is energized.
LED13 (Rx DATA) – Illuminated when receiving data from a database unit.
LED14 (Tx DATA) – Illuminated when transmitting data to a database unit.
LED15 (COMMS) – Illuminated when the door controller comms to the database unit is active.
LED16 (OK) – When the controller is functioning correctly, this should flash at two-second intervals (one
second on and one second off).
LED17 (12V) – Illuminated when the 12Vdc supply is connected.
LED18 (5V) – Illuminated when the on-board 5Vdc supply is operating.
LED19 (3V) – Illuminated when the on-board 3Vdc supply is operating.
LEDs on the OC4/24 Alarms Controller
LED1-24 (OPn) – Illuminated when the auxiliary output relay is energized.
LED25 (Rx) – Illuminated when receiving data from a database unit.
LED26 (Tx) – Illuminated when transmitting data to a database unit.
LED27 (OK) – When the controller is functioning correctly, this should flash at two-second intervals (one
second on and one second off).
LED28 (3V) – Illuminated when the on-board 3Vdc supply is operating.
LED29 (5V) – Illuminated when the on-board 5Vdc supply is operating.
LED30 (12V) – Illuminated when the 12Vdc supply is connected.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 72 73

Comments to this Manuals

No comments