Renesas Single-Chip Microcomputer M37531T-ADS User Manual download pdf (Page 12)

M38000T2-CPE User’s Manual Terminology

REJ10J0301-0400 Rev.4.00 March 01, 2006 Page 12 of 78

Terminology

Some specific words used in this user’s manual are defined as follows:

Emulator M38000T2-CPE

This means the compact emulator (this product) for the 740 Family MCUs.

Emulator system

This means an emulator system built around the M38000T2-CPE emulator. The M38000T2-CPE emulator system is

configured with an emulator main unit M38000T2-CPE, emulator MCU, user system, 740 Compact Emulator Debugger and

host machine.

740 Compact Emulator Debugger

This means a software tool starting up from the High-performance Embedded Workshop to control the emulator for the 740

Family and enables debugging. (In this user's manual, the 740 Compact Emulator Debugger may be represented as "emulator

debugger")

Integrated development environment High-performance Embedded Workshop

This tool provides powerful support for the development of embedded applications for Renesas microcomputers. It has an

emulator debugger function allowing for the emulator controlled from the host machine via an interface. Furthermore, it

permits a range of operations from editing a project to building and debugging it to be performed within the same application.

What’s more, it supports version management.

Firmware

This means a program stored in the flash ROM of the emulator. It analyzes contents of communication with the emulator

debugger and controls the emulator M38000T2-CPE. This program is downloadable from the emulator debugger to upgrade

the debugger, etc.

Host machine

This means a personal computer used to control the emulator system.

Emulator MCU

This means an MCU with a terminal for connecting the emulator. This is used by connected to the tip of this product (user

system side).

Target MCU

This means the microcomputer you are going to debug.

User system

This means a user’s application system using the microcomputer to be debugged.

User program

This means a user’s application program to be debugged.

In this user’s manual, this symbol is used to show active LOW. (e.g. RESET#)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 77 78

No comments

Renesas Single-Chip Microcomputer M37531T-ADS User Manual Page 12