Renesas Single-Chip Microcomputer M37531T-ADS User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
M38000T2-CPE User’s Manual 1. Outline
REJ10J0301-0400 Rev.4.00 March 01, 2006
Page 16 of 78
1.2.2 Names and Functions of each part of the Emulator
Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
M38000T2-CPEC REV.B
(8) Probe cable
M38000T2-CPE
COMPACT
EMULATOR
STATUS
SYSTEM
MADE IN JAPAN
STATUS
TARGET
POWER
5.0
V
USB
RESET
POWER
SAFE
POWER
CLOCK
RESET
RUN
RLSS/RLFS
RSS/RFS
WHITE: RESET
RED:VCC
BLACK:GND
TARGET
GOOD
(7) Emulator MCU type selection switch
(10) Target status cables
(5) Power supply connector
(6) USB interface connector
(3) System reset witch
(4) LED for checking the connections of
the target status cables
(1) System status LEDs
(2) Target status LEDs
(9) Probe board M38000T2-CPEC
omitted
omitted
Figure 1.2 Names of the LEDs on the upper panel of the M38000T2-CPE
(1) System Status LEDs
The system status LEDs indicate the emulator main unit’s operating status etc. Table 1.2 lists the definition of the system status
LEDs.
Table 1.2 Definitions of the system status LEDs
Name Number Color Status Meaning
ON Power is supplied to the emulator. POWER LED1 Orange
OFF Power is not supplied to the emulator.
ON Emulator system has started normally. SAFE LED2 Green
OFF Emulator system has not started normally.
(2) Target Status LEDs
The target status LEDs indicate the target MCU’s power supply and operating status.
Table 1.3 lists the definition of each target status LED.
Table 1.3 Definitions of the target status LEDs
Name Number Color Status Meaning
ON Power is supplied to the emulator MCU. POWER LED3 Orange
OFF Power is not supplied to the emulator MCU.
ON
Internal clock ø is output from the emulator MCU.
CLOCK LED4 Green
OFF Internal clock ø is not output from the emulator MCU.
ON Emulator MCU is being reset. RESET LED5 Red
OFF Emulator MCU is not being reset.
ON User program is being executed. RUN LED6 Green
OFF User program is not being executed.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 77 78

Comments to this Manuals

No comments