Renesas Single-Chip Microcomputer M37531T-ADS User Manual download pdf (Page 18)

M38000T2-CPE User’s Manual 1. Outline

REJ10J0301-0400 Rev.4.00 March 01, 2006

Page 18 of 78

(5) Power Connector (J1)

This is a connector for connecting the power supply to this product. For details, refer to “2.4 Connecting the Power Supply for

the Emulator” (page 23).

(6) USB Cable Connector (J2)

This is a USB cable connector for connecting the host machine to this product. For details, “2.5 Connecting the Host Machine”

(page 24).

(7) Emulator MCU type selection switch

This is a switch to select the emulator MCU type. For details, see "2.6.1 Setting the Emulator MCU Type Selection Switch" on

page 25.

(8) Probe cable

This is a cable to connect the emulator MCU. The probe cable is flexible. However, excessive flexing or force may break the

cable.

(9) Probe board

This is a board to connect the emulator MCU. Connect this probe board to the upper terminal of the emulator MCU.

(10) Target status cables

These are cables to monitor the VCC, GND and RESET of the user system. Connect these cables to the user system.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 77 78

No comments

Renesas Single-Chip Microcomputer M37531T-ADS User Manual Page 18