Renesas Single-Chip Microcomputer M37531T-ADS User Manual download pdf (Page 19)

M38000T2-CPE User’s Manual 1. Outline

REJ10J0301-0400 Rev.4.00 March 01, 2006

Page 19 of 78

1.3 Specifications

Table 1.6 lists specifications of the M38000T2-CPE.

Table 1.6 M38000T2-CPE specifications

Applicable MCUs 740 Family MCUs which have emulator MCUs

Usable mode Single-chip mode

Memory expansion mode

Microprocessor mode

Maximum operating frequency

10 MHz (frequency/1 mode, 0-wait)

Minimum operating frequency 32.768 kHz (frequency/2 mode)

When the emulator MCU is

RSS or RFS type.

2.7 to 5.0 V (within the MCU's specified range)

Applicable power supply

When the emulator MCU is

RLSS or RLFS type.

1.8 to 5.0 V (within the MCU's specified range)

Emulation memory 64 KB (can be mapped by 64 bytes)

Clock supply Only the clock on the user system can be used.

Basic debugging functions - Download

- Software break (max. 64 points, break before execution)

- Program execution/stop (allows free-run execution supporting software breaks)

- Memory reference/setting (reference/setting C-variables, run-time execution)

- Register reference/setting

- C-level debugging, etc.

Recording cycle

32768 cycles

(Address, data, MCU status)

Real-time trace function

Trace mode

- Before Break mode

32768 cycles of instruction execution before the user

program stopped is recorded.

- After Go mode

32768 cycles of instruction execution after an event was met

is recorded.

Hardware break function Hardware break point 1 point (Address match, bus match, max. 256 pass counts)

Time measurement point Time between program start and stop

Resolution 100 ns

Execution time measurement

function

Count source Emulator timer

Real-time RAM monitor

function

1,024 bytes

Connection to user system Via an emulator MCU and converter board prepared for each MCU.

Power supply for emulator

DC 5.0 V ±5% (2 A) externally supplied (prepare the power supply separately)

Host machine interface USB (USB 1.1

full-speed, mini-B standard connector)

*1 Applicable MCUs are occasionally updated. For more information on applicable MCUs, please visit the Renesas Tool

Homepage at http://www.renesas.com/en/tools

*2 Available to connect the host machine that supports USB 2.0. With the USB interface, not all hardware (such as host

machine, USB devices, USB hub) combination will work and guaranteed.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 77 78

Comments to this Manuals

No comments

Renesas Single-Chip Microcomputer M37531T-ADS User Manual Page 19

Comments to this Manuals

Related products and manuals for Networking Renesas Single-Chip Microcomputer M37531T-ADS