Renesas Single-Chip Microcomputer M37531T-ADS User Manual download pdf (Page 71)

M38000T2-CPE User’s Manual 5. Troubleshooting

REJ10J0301-0400 Rev.4.00 March 01, 2006

Page 71 of 78

5. Troubleshooting

This chapter describes how to troubleshoot when this product does not work properly.

5.1 Flowchart to Remedy the Troubles

Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator

debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.

http://www.renesas.com/en/tools

Turning on the power of the emulator

Not normal

Check LEDs display

of the emulator

Normal Refer to 5.2. (1) “When the LEDs of the M38000T2-CPE Do

Not Display Normally” on page 73.

Not normal or error displayed

Init dialog box of emulator

debugger displayed

Normal

1. Check the operating environment etc. of the emulator

debugger.

(See the 740 Compact Emulator Debugger user's manual)

2. Reinstall the emulator debugger.

3. Refer to 5.2. (2) “MCU Setting Dialog Box Does Not

Appear at Debugger Startup” on page 74.

“Connected” is displayed on the “Debug”

tab of the emulator debugger’s output

window.

Emulator system started up normally

Figure 5.1 Flowchart to remedy the troubles

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 77 78

No comments

Renesas Single-Chip Microcomputer M37531T-ADS User Manual Page 71